PSS / AMP Shop
333 West Baseline St.
San Bernardino CA 92410
909.885.7050 Phone
909.884.8608 Fax
sales@ampshop.com
Monday - Friday | 8am - 5pm Pacific


We can build you a custom power distribution system. (We also sell Connectors)

Parts for "do-it-yourself" distro, And we can fabricate metal parts like panels at surprisingly low cost.

$169.00 As Shown 		These are probably our most popular low cost system. These little units are good up to 200 amps and can contain any connector that will fit on the panel. With up to 8 circuits these make a great entry level system for smaller sound or lighting systems The feeder cable can be any size from 8/4 for lighter loads up to 2/4 for larger systems.

Powercon or other non-standard connectors will increase the price slightly.

$249.00 As Shown
 This is an amplifier rack module. This unit can have an L14-30,L21-30 connector for in and thru or a 50 amp Hubbell inlet with no thru. there are 4 duplex edisons on the back however other connectors such as the "TT-30" rv connector used by crown, twistlocks or powercons can be fitted in their place. Custom labeling is available at slightly higher cost.

Powercon or other non-standard connectors will increase the price slightly.

$989.00 As Shown
 This is a semi-modular panel, It's our most popular design for audio only or audio moderate (10kw) lighting loads. This unit uses up to 21 SquareD type QOxx breakers and Hubbell connectors. we can offer this unit in three phase for only $122.00 more. Custom labeling and meters are available.

Powercon or other non-standard connectors will increase the price slightly.

$179.00 As Shown
 This is a 4 drop stage stringer designed for a 24' stage, the drops are 6.5 feet apart. The distance from the male plug to the first drop is 20 feet making backline power a simple one-step operation. The unit features an L14-20 inlet, 8 color coded Edisons, Die cast aluminum drop boxes, Matt black non-reflective powder coat finish. You may order the unit with more or less drops and in any length.

You may specify a different inlet connector or a three-phase version with an L21-20 or other NEMA connector.

Powercon or other non-standard connectors or other changes will affect the price.

$279.00 As Shown
 This is an amplifier rack module is designed for Crown and other manufacturers who use the TT-30 travel trailer power connector. The unit features Hubbell 50 amp California connector for the power inlet and up to 8 separate circuits. In this configuration there are two duplex Edisons on separate 20 amp circuits four TT-30 (RV-30) connectors all on separate 30 amp circuits on the rear panel. The front contains the power inlet, circuit breakers and two duplex edisons on one 20 amp circuit.

You may order the unit with any connectors that will fit and with up to 8 circuits. Two pole (240V) can be implemented as well but require 2 circuits each.

Powercon or other non-standard connectors or other changes will affect the price slightly

$899.00 As Shown
 This is a semi-modular panel, This unit uses up to 16 SquareD type QO breakers and Hubbell connectors. This unit features Cam-lock inlet, 8 duplex Edisons and 4 Hubbell 50 amp "California connectors". Custom labeling is available at slightly higher cost.

This unit can be ordered with meters for $95.00 more. Other configurations and cam in / out are available. Call for more details.

Powercon or other non-standard connectors will increase the price slightly.
You can purchase a complete system or any part you might need. The standard finish is fine texture black powder coating but most colors are available including OSHA safety colors which are required in some areas. Call or e-mail us for details.

Need a new distro but don`t see anything you like? Check out our CNC panel machining service. We can precisely cut the holes you need in your own material or we can supply you with finished panels machined to your design, ready to wire into your application.